Ametek ReFlex Programming Manual Manuel d'utilisateur télécharger pdf (Page 64)

ReFlex Power™ Programming Manual DC Module Remote Programming

60 M380056-03 Rev M

3.8

OUTPUT SCPI COMMANDS

3.8.1 OUTPUT

SCPI

OMMAND

UMMARY

OUTPut[n]

:ISOLation <bool>

:DEFault <bool>

:DEFault?

:ISOLation?

:POLarity <NORM/0/OFF|INV/1/ON>

:POLarity?

:PROTection

:DELAY <NRf>

:DELAY?

:FOLD <NRi>

:FOLD?

:SENSe <bool>

:DEFault <bool>

:DEFault?

:SENse?

:STATe <bool>

:STATe?

:TRIPped?

:MODFault <bool>

:MODFault?

:CLEar <bool>

:CLEar?

:DPDelay

:TIMER <NRf>

:TIMER?

3.8.2 OUTPUT

SCPI

OMMAND

EFERENCE

Command

Description

OUTPut<n>

Output subsystem. Module ‘n’.

:ISOLation <bool>

Turns 1/ON or 0/OFF, the output isolation relay. The output

voltage must be set to zero prior to issuing this command. The

ISOL relay can’t be opened if Sense relay is closed.

:ISOLation?

Query the state of the ISOLation relay. 0 = open, 1 = closed.

DEFault <bool>

Sets DEFault state of ISOL Relay, POR default state is ON. The

ISOL/SENSe relays will be automatically sequenced during the

STATE command.

DEFault?

Query DEFault state of Isolation relay

:POLarity

Changes the state of the polarity relay. This command requires

that the isolation/sense relays be opened beforehand. If the

isolation relay is closed when this command is attempted, the

state of the polarity relay will not change, and an error message

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 133 134

Commentaires sur ces manuels

Pas de commentaire

Ametek ReFlex Programming Manual Manuel d'utilisateur Page 64

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Ametek ReFlex Programming Manual