Ametek ReFlex Programming Manual Manuel d'utilisateur télécharger pdf (Page 30)

ReFlex Power™ Programming Manual Controller Module Remote Programming

26 M380056-03 Rev M

With authorized log-in (default parameters: User ID = admin; Password =

password), click the IP CONFIGURATION tab (Figure 2-6) where you can

customize the Host Name and Description, and/or select Use a Static IP

Address (Figure 2-7) to change IP Address, Subnet Mask, Gateway, DNS

Server and Listening Port. Please ask your IT Administrator for support.

2.5.3 IP

ONFIGURATION

The default IP Address configuration is DHCP-enabled and Auto IP-enabled. If

a DHCP server is not found, an address in the range of 169.254.[1 thru 254].[0

thru 255] will be selected. If there is no DHCP server on your local network,

your PC must also be configured for Auto-IP for the RFP system to be

discovered. For only DHCP, select “Obtain an IP Address Automatically” and

deselect “Auto IP Enabled”). Click the APPLY button to set your inputs.

Figure 2-6. IP CONFIGURATION Page, Default

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 133 134

Pas de commentaire

Ametek ReFlex Programming Manual Manuel d'utilisateur Page 30