Ametek SFA Series Ethernet Programming Manuel d'utilisateur télécharger pdf (Page 35)

SG Series Programming Ethernet Features, Functions and Specifications

M550129-03 Rev K

4-3

• Soft limits for voltage and current

• Overvoltage protection

• Output enable/disable

• Maskable fault interrupt

• Hold and trigger

• External relay control

• Full calibration

4.2.3

Readback Functions

• Measured voltage and current

• Voltage and current settings

• Soft voltage and current limits

• Overvoltage protection setting

• Status and Accumulated Status registers

• Programming error codes

• Fault codes

• Manufacturer, power supply model, and firmware version identification

4.3

SPECIFICATIONS

(SUBJECT TO CHANGE WITHOUT NOTICE)

4.3.1

Ethernet/LAN Configuration

• Ethernet Standard: IEEE-802.3 compliant

• Technology: 10/100Base-T

• Connection Monitoring: Media Sense supported

• Protocol: TCP/IP, IPV4

• ICMP (ping server): Enable (default)/Disable

• IP Address Assignment: Automatic via DHCP (Primary default), Static,

or Automatic Private IP Addressing (Auto-IP, Secondary default)

• VXI-11 Discovery: Supported

• Security: Password protected access, and selective permissions for

each user

4.3.2

Ethernet Configuration Factory Defaults

PARAMETER

DEFAULT

Host Name SGx<base model>-<last four digits of serial number>

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 158 159

Pas de commentaire

Ametek SFA Series Ethernet Programming Manuel d'utilisateur Page 35