Ametek BPS Series Programming Manual Manuel d'utilisateur télécharger pdf (Page 52)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual

52 Manual P/N 7003-961 Rev AA

DISPlay:TEXT

This command sets the character string that is displayed when the display mode is set to

TEXT. The argument is a quoted string limited to upper case alpha characters and numbers.

The display is capable of showing up to 320 characters divided over 8 lines of 40 characters

each. If the string exceeds the display capacity, it will be truncated.

Command Syntax DISPlay[:WINDow]:TEXT[:DATA]<display_string>

Parameters <display string>

*RST Value null string

Examples DISP:TEXT "DO TEST1”

Query Syntax DISPlay[:WINDow]:TEXT?

Returned Parameters <SRD> (the last programmed string)

Related Commands DISP DISP:MODE

DISPlay:LOCation

This command sets the display pointer to a specific row and column address. Any text send

with the DISP:TEXT command will be placed at this location on the display. This command

takes two numeric parameters, row and column. The row range is from 1 through 8, the

column range is from 1 to 40. Thus, the first character position is at 1,1, the last one is at

8,40. If a string is send that is longer than the remaining column positions on a row, it will be

truncated.

Command Syntax DISPlay[:WINDow]:TEXT:LOCation <row>,<column>

Parameters <NR1>, <NR1>

*RST Value n/a

Examples DISP:TEXT:LOC 2,1

Query Syntax n/a

Related Commands DISP:MODE DISP:TEXT

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 225 226

Pas de commentaire

Ametek BPS Series Programming Manual Manuel d'utilisateur Page 52