Ametek SFA Series Programming Manual Manuel d'utilisateur télécharger pdf (Page 12)

Configuration Sorensen SF Series

ADDRESS SWITCHES

Switch Position Description

ON 1

OFF 0

2.3 Remote Programming Via RS-232

The DIA’s RS-232 interface operates at fixed 19.2Kbaud for SFA and is selectable from 2400 to

19.2Kbaud for the SFI, with 8 data bits, no parity, and 1 stop bit. All DIA commands are

supported at the RS-232 interface with the exception of the Service Request (SRQ) function

which is a GPIB-specific function requiring the dedicated Service Request line of the IEEE-

488.2 interface. In this case, the SRQ function has no effect. The RS-232 interface is

accessible through the rear panel 6-pin RJ-11 connector. The connector is labeled RS232.

Figure 2–2. RS-232 Rear Panel RJ-11 Connector Pinout

Rear Panel To PC

Figure 2–3. SF to PC RS-232 Connection (RJ-11 to DB-9)

2-4 M550292-03 (Programming)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Pas de commentaire

Ametek SFA Series Programming Manual Manuel d'utilisateur Page 12