Ametek XBT Series Installation Manuel d'utilisateur télécharger pdf (Page 2)

Technical Note

XBT Rackmount Installation

Document No. M370187-05 Rev A • 7/3/2008

Figure 3. Unit, Bottom Up, with Main Rackmount Piece Aligned

5. Use screwdriver to secure rackmount piece to unit with two (2) M3.0 screws.

6. If installing two supplies, repeat Steps 1-6, then skip to Step 12. For a single unit, continue with Step 8.

7. Turn assembled unit and rackmount piece so that unit’s top is face up and rackmount piece is lying on work

surface (

Figure 4).

Figure 4. Unit, Top Up, Secured to Main Rackmount Piece

8. Set filler panel (

Figure 5) in blank space next to unit, flush with side and front lip of rackmount piece (Figure 6).

9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: sales@programmablepower.com • Web: www.programmablepower.com

2 of 6

1 2 3 4 5 6

Technical Note 1

Commentaires sur ces manuels

Pas de commentaire

Ametek XBT Series Installation Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Ametek XBT Series Installation